Cellular concrete, which is also called aerated concrete or foam concrete – is a relatively new material and a lot of advantages over such building material as brick. Such concrete blocks have larger dimensions and at the same time they are easier than brick, therefore, with the help of one block, 20 bricks are replaced, although it weighs less. The gas concrete partition due to the presence of thin seams dries much faster than brick, and its surface is so smooth that it does not need to be plastered – it is enough to carry out a final putty to carry out finishing work. Thanks to all of the above, the highest techniquity of the use of aerated concrete is ensured. Recently, they often use the services of the site /international transportation /this information is very useful.
The partition from cellular concrete is easy to process quite easily. Due to the strength characteristics of aerated concrete, partitions of various heights are being built. In the process of masonry, a sand-cement mixture and special glue are used. The installation of each subsequent row of blocks is carried out using preliminary missing the joined surfaces with the solution and the dressing of blocks of the previous row. The partition to the wall is fixed with reinforcement and solution. The gas concrete blocks themselves are easily sawn, cut and drilled.