Parquet board Baum Premium oak pearls is wide strips, in which the upper layer of natural wood of oak is 4 mm thick. The outer layer made of a solid array of oak gives the entire design of the parquet board increased strength and stability. Outwardly, the Baum single -lane parquet board is practically not distinguished from the wide massive board of the Premium class. Moreover, the Baum parquet board is much easier to mount and does not crack.
The inner layers of the Baum parquet boards are made of givey wood. This breed has much more density and uniformity than coniferous species used by many manufacturers of parquet boards. To protect the lower part of the board from moisture, its base is made of a whole gvee wrist. Sometimes the lower layer of several parquet dies at once.
At the parquet board, Baum Premium oak pearls Brained surface – this is when soft oak fibers are removed from the floor surface. Thanks to breasting, it is possible to emphasize the pattern of annual oak rings, and the surface becomes pleasant to the touch. Moreover, the brushed parquet is somewhat more practical than usual, t. to. allows you to skillfully mask some small defects in the form of dents or scratches. It is not difficult to wash the brushed parquet – the board has a shallow relief yes, besides, it is covered with a protective layer.
Parquet Baum Premium oak pearls large chamfer around the perimeter. Under the term “FASK” means bezing along the edges of the board, which visually distinguish each bar. In this way, the noble appearance of the entire parquet is created, its natural nature emphasizes. But, in addition to a purely aesthetic role, the chamfer fulfills quite practical goals: it helps to hide the cracks that may form due to temperature changes or for other reasons.
Parquet board Baum Premium oak pearls covered with seven layers of UV-varnish. The varnish with ultraviolet curing creates a protective layer on the surface of the parquet board, increasing the stability of the parquet to abrasion. The experiments conducted that a 7-layer UV-lak in normal home conditions can last more than 30 years.
The Parquet board of the oak pearl is equipped with an excellent 3rd generation Besecle Castle (Leimlose Montagesystem Unilin), which has proven itself well among parqueters. A feature of the 3rd generation castles was their high strength and the possibility of reusable use. Parquet can be safely disconnected in the event of a move and assemble again in a new place without using any adhesives, sealants or nails.
Before laying a parquet board, you must make sure that the grounds are dry and strength. The base can be a bulk floor, screed, GVL or sheets of moisture -resistant plywood. The maximum allowed drop in the height of the base is 2 mm per 2 m². A cork substrate or something similar to it with a thickness of not more than 2 mm is laid on the base. If the floor of the bulk or screed, then it is recommended to lay polyethylene in 200 microns overlap before laying a cork substrate.
Duba characteristics
The hardness of the oak on Brinell: 3.8
Oak density: 700 kg/m3
Prices for Parquet board Baum Premium oak pearl
Depending on the volume, this product can be bought at a discount, the size of which can be clarified by the manager
Name
The size
Options
Price for 1 m2
Parquet board Baum Premium oak pearls single -lane (branded, art. P3)
1860 x 189 x 15 mm
Coating: UV-clip
Number m² in pack.:
2.110
563 UAH
* Parquet board is sold packages. The final number of parquet is calculated based on the necessary number of packages.
