One of the frequent breakdowns of washing machines is the lack of spin after a full laundry treatment program. This results in wet products that need to be squeezed out independently and take a long time to dry. This type of malfunction occurs for various reasons and can be solved in several ways. To understand the intricacies of the repair process, it is recommended to study more information on mannyappliances.
Causes
Among the main factors that can lead to such a phenomenon are:
- The wrong washing program has been selected, where the spin mode is not provided. It is worth checking the set parameter, where there are options for specifying delicate fabrics or gentle processing.
- Each machine has a maximum loadable laundry weight. If you exceed it, then the mechanism simply cannot cope with high-quality spinning and things will remain wet.
- The drum is unbalanced. This may be due to things getting knocked together when there is an overload on one side, or a loosening of the belt, or improper balancing of the pulley.
- The liquid does not drain well, some of it remains in the drum, and after spinning it is absorbed back into the tissues.
For each machine there may be general and specific problems, so to understand all the details, it is worth looking at more detailed information on https://mannyappliances.com/washing-machine-repair/.
Elimination
If there is wet laundry in the washing machine, you should first look at what program is set for the device and whether the spinning process has taken place. It is worth checking the instructions for the unit. If a mode is set where spinning is provided, check how things are placed in the drum and the loading level by the weight of dry items.
To check, you can load a small amount of clothing or other fabric materials, spread them out evenly, and start the washing process in a mode where spinning is required.
If things remain wet, check the water drain; the outlet pipe may be clogged. If the drum does not rotate, or you hear a knocking sound, an uneven hum, or the machine vibrates, it means the balancing is off or the bearing has failed. This requires disassembling the device, inspecting the pulley, the belt driving the drum, and the bearing. These parts can be replaced by selecting similar ones by article number. To determine the necessary options and identify the causes, it is worth looking in more detail on mannyappliances.com for the main factors, symptoms of breakdowns and methods for correcting them.
Insufficient engine power, which cannot spin the drum to the required values, requires calling a technician and repairing the equipment in a workshop, or replacing the motor at home. This can only be done by a specialist.